Wintec Wintec Webbers stirrup straps

Wintec Webbers are revolutionary stirrup straps made without buckles to reduce the lump under your thigh and provide closer contact with your horse. They feature a strong webbing core and hard-wearing materials for excellent durability.

Size Guide

To ensure you purchase the correct length, we recommend consulting your local saddle specialist. As a comparison to traditional stirrup leathers:

• Size 0 / 60 cm (shortest hole 38 cm to longest hole 53 cm)
  → most similar to 122 cm stirrup leathers
• Size 1 / 70 cm (shortest hole 48 cm to longest hole 63 cm)
  → most similar to 140 cm stirrup leathers
• Size 2 / 80 cm (shortest hole 58 cm to longest hole 74 cm)
  → most similar to 160 cm stirrup leathers

Usage Guide

1. Remove the sleeve, then thread the looped end of the Webber through the eye of your stirrup iron and replace the sleeve.
2. Slide the loop of the Webber over your stirrup bar. Ensure the buckle sits below the saddle flap to minimise wear.
3. To adjust the length:
   • Fold the T-shaped buckle end up behind the stirrup iron and insert it into the I-shaped hole at your preferred length.
   • Turn the buckle until the Webber lies flat and secure.
4. Pull the sleeve down firmly to ensure the T-shaped buckle is fully covered and your tack is protected.
5. To run up your Webbers:
   • Remove the T-shaped buckle from the riding position and insert it into the top hole near the stirrup bar.
   • Run the stirrup iron up the front of the Webber, tuck the folded Webber through the stirrup iron, and pull down to secure it.